MT40A-LV-SBEC Gen2 is a 40A ,Switch mode 5.5V /4A Bec, which is capable of handling a maximum current burst of 60A.
Its performance in terms of compatibility, reliability and stability competes with world famous brands without the high price tag. Hard to beat features/price ratio of these products
Features:
- Support High RPM motors.
- Circle menu setting is simple.
- Power arming protection:
- Prevents the motor from accidentally running when switched ON
- Lost Throttle signal protection:
- The ESC will automatically reduces output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.
- Safety thermal over-load protection:
- Automatically reduce output power to half when the temperature reaches 110℃, restore output power when the temperature is below 110℃.
- Can continuously provide power to the motor.
- Acceleration: Provides quick acceleration start ups with a linear throttle response.
- Reversible motor direction using TS programming card.
- Governor Mode: For Helicopter application
- With latest humanize software design, especially for all types of brushless motor.
- New advanced programming software.
Functions:
- Brake Setting: on/off
Note:Factory default setting: off.
- Battery type: LiPo /NiMh/NiCad
Note: Factory default setting: 3 Li- Poly
- Under voltage protection (Low voltage cutoff type):
Reduce power:
- Reduce motor speed to half throttle
- Cut off: Stop motor immediately
- Ignore: Motor won't stop until battery totally gone
Note: Factory default setting: Reduce power
- Soft start (Acceleration): very soft/ soft/ start acceleration
Note. Factory default setting: Soft start: Enable
Timing:
- Automatic: (7-30 degree)
- Soft: (7 -22 degree)
- Hard :( 22-30 degree)
Note. Factory default setting: Automatic
- Frequency: 8 KHz/ 16 KHz, Factory default setting: 8 KHz
- Heli Governor Mode: Factory default setting: rpm control off
- 60A Max Current Burst. With 5.5V/4A Switch Mode Bec.
- Input Voltage: 2-6sLipo or 5-18cells NiCD.
Net Weight : 30g
- Capable of handling 4 std servo's and 6sub micro's without the need for sepearte reciever pack. ( Depends on servo torque and size)
The MAYTECH ESC's high power BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped E-helicopters. Maytech speed controllers can be programmed by transmitter or quickly and easily by using MayTech TS programming card.
