JP Eng-Pro-60A-LV-5.5V/4A/SBEC-


60A,Switch mode 5.5V/4A Bec, brushless speed controller which is capable of handling a maximum burst current of 75A.

Its performance in terms of compatibility, reliability and stability can compete with world famous brands without the associated high price tag.


  • Fast 400Htz  refresh rate for Multicopter applications
  • Support High RPM and High Pole count motors.
  • Circle menu setting is simple.
  • Power arming protection:
  • Prevents the motor from accidentally running when switched ON
  • Lost Throttle signal protection:
  • The ESC will automatically reduces output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.
  • Safety thermal over-load protection:
  • Automatically reduce output power to half when the temperature reaches 110℃, restore output power when the temperature is below 110℃.
  • Motor Rotation Direction can be easily set by programming card.
  • Acceleration: Provides quick acceleration start ups with a linear throttle response.
  • Governor Mode: For Helicopter application 
  • With latest humanize software design, especially for all types of brushless motor.
  • New advanced programming software.


  • Brake Setting: on/off
    Note:Factory default setting: off. 
  • Battery type: LiPo /NiMh/NiCad
    Note: Factory default setting: 3 Li- Poly 
  • Under voltage protection (Low voltage cutoff type): 

Reduce power:

  • Reduce motor speed to half throttle
  • Cut off: Stop motor immediately
  • Ignore: Motor won't stop until battery totally gone)
     Note: Factory default setting: Reduce power 
  • Soft start (Acceleration): very soft/ soft/ start acceleration
    Note. Factory default setting: Soft start: Enable 


  • Automatic: (7-30 degree)
  • Soft: (7 -22 degree)
  • Hard :( 22-30 degree)
    Note. Factory default setting: Automatic 
  • Frequency: 8 KHz/ 16 KHz, Factory default setting: 8 KHz 
  • Heli Governor Mode: Factory default setting: rpm control off
  • 75A Max Current Burst. With 5.5V/4A Switch Mode Bec.
  • Input Voltage: 2-6sLipo or 5-18cells NiCD.
    Net Weight : 40g 


Sold Out
  • Model: JP Eng-Pro 60A-LV-SBEC-V1
  • 0 Units in Stock

Your IP Address is:
Copyright © 2017 Web design by Ecommerce Web Design