MT180A- HV -OPTO (5s-14s) is a 180A continous brushless speed controller .
Features:
- Support High RPM motors.
- 18 pcs of High Quality MOSFETS used
- Anti Sparki circuit
- Power arming protection:
- Prevents the motor from accidentally running when switched ON
- Lost Throttle signal protection:
- The ESC will automatically reduces output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.
- Safety thermal over-load protection:
- Automatically reduce output power to half when the temperature reaches 110℃, restore output power when the temperature is below 110℃.
- Acceleration: Provides quick acceleration start ups with a linear throttle response.
- Governor Mode: For Helicopter application
- With latest humanize software design, especially for all types of brushless motor.
- New advanced programming software.
Functions:
- Brake Setting: on/off
Note:Factory default setting: off.
- Battery type: LiPo /NiMh/NiCad
Note: Factory default setting: 3 Li- Poly
- Under voltage protection (Low voltage cutoff type):
Timing:
- Automatic: (7-30 degree) or 6 settings can be chosen
- Frequency: 8 KHz/ 16 KHz, Factory default setting: 8 KHz
- Heli Governor Mode: Factory default setting: rpm control off
- 180A Continous . No Bec . Requires separate receiver pack to run servos.
- Input Voltage: 5-14s Lipo .
Net Weight : 150g
Dimensions: 75x55x25mm
The MAYTECH Harrier Supreme ESC's are extremely well built. Sure to satisfy any discerning Modeller.
