MT30A-NoBEC is a 30A brushless speed controller which is capable of handling max burst current of 40A. Its performance in terms of compatibility, reliability and stability can compete with world famous brands without the high price tag.
Features:
- Fast 400Hz refresh rate for multi rotor copter applications
- Support High RPM motors.
- Circle menu setting is simple.
- Power arming protection:
- Prevents the motor from accidentally running when switched ON
- Lost Throttle signal protection:
- The ESC will automatically reduces output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.
- Safety thermal over-load protection:
- Automatically reduce output power to half when the temperature reaches 110℃, restore output power when the temperature is below 110℃.
- Motor Direction can be easily reversed using programing card.
- Acceleration: Provides quick acceleration start ups with a linear throttle response.
- Governor Mode: For Helicopter application
- With latest humanize software design, especially for all types of brushless motor.
- New advanced programming software.
Functions:
- Brake Setting: on/off
Note:Factory default setting: off.
- Battery type: LiPo /NiMh/NiCad
Note: Factory default setting: 3 Li- Poly
- Under voltage protection (Low voltage cutoff type):
Reduce power:
- Reduce motor speed to half throttle
- Cut off: Stop motor immediately
- Ignore: Motor won't stop until battery totally gone)
Note: Factory default setting: Reduce power
- Soft start (Acceleration): very soft/ soft/ start acceleration
Note. Factory default setting: Soft start: Enable
Timing:
- Automatic: (7-30 degree)
- Soft: (7 -22 degree)
- Hard :( 22-30 degree)
Note. Factory default setting: Automatic
- Frequency: 8 KHz/ 16 KHz, Factory default setting: 8 KHz
- Heli Governor Mode: Factory default setting: rpm control off
- 40A Max Current Burst.
- No BEC. Separate battery pack required
- Input Voltage: 2-4sLipo or 5-12cells NiCD.
Net Weight : 25g
MayTech speed controllers can be programmed using transmitter or quickly and easily by using Maytech TS programming card
