MTB-40A-LV-OPTO is specially designed for RC Electric Boat. 2s-5s Lipo or 6-16Cells
Features:
Easy setting; easy operation with waterproof function.
It can be connected to USB port of PC by USB cable; it is convenient to set all parameters of ESC.
Safe start-up system:
The motor won't be started no matter which position the throttle stick is on when the battery is connected.
- Automatic power cut-off:
- When the motor stops rotating or the radio signal loses for more than 3 seconds, the power will automatically be cut off.
- No BEC: The receiver needs another electric power supply. (5V/3A UBEC can apply the power.)
- Three frequencies selectable:
- 8kHz / 16kHz / 32kHz for different series motors.
- Forward / Reverse function.
- Over-heat protection:
- The power will be cut-off as it is heated up to 110℃.
- Low-voltage cut-off:
- oBy PC (Via USB link), the LiIo/LiPo battery single cell's cut-off voltage can be set during 2.0V-3.2V (Step: 0.1V).
- oBy PC (Via USB link), the Ni-MH/Ni-CD battery single cell's cut-off voltage can be set during 0.4V-1.0V (Step: 0.1V).
- Timing mode:
o Timing mode 1: 2-5°.
o Timing mode 2: 8-10°.
o Timing mode 3: 15-28°.
o Timing mode 4: 30°.
- By PC via USB cable: timing mode can be set from 1-30 (Step: 1 ).
- Factory Default Setting:
- Forward / Reverse on mode.
- Timing mode 1 (2-5°).
- Cut-off voltage: 5.5V for two cells LiIo/LiPo battery.
- Frequency 1 (8 kHz).
- 60A Max Burst Current . No BEC (OPTO) need separate pack for receiver .
- Net Weight : 38g
